| 1. In the presence take off a wheel cap, then weaken bolts of fastening of a forward wheel. Tighten the emergency brake, then lift a forward part of the car and fix on supports. Remove the corresponding forward wheel. |
| 2. Unscrew самоконтрящуюся the nut fixing the spherical hinge of a tip of steering thirst for a rack of a forward suspension bracket. |
| 3. Using a stripper of spherical hinges, take a pin of the spherical hinge of a tip of steering draft from a rack of a forward suspension bracket. |
| 4. If steering draft is removed without tip, weaken tightening the bolt fixing steering thirst for the carving regulator on a tip. |
| 5. Using a screw-driver edge as the lever, remove the fixing plate from heads of bolts, fixing steering thirsts for steering transfer and unscrew bolts (see the drawing). |
| 6. If steering draft is removed assembled together with steering rod ends, take it from under the car. |
| 7. If steering draft is removed without steering rod end, note paint or an adhesive tape note the provision of a tip on the carving regulator, or count number of rounds of a carving on the acting part of the carving regulator. Unscrew steering draft from a tip and take from under the car. |
