Opel Vectra A

since 1988-1995 release

Repair and operation of the car



Vektr's Opel And
+ 1. Maintenance instruction
+ 1.1 Maintenance
+ 2. Engine
+ 3. Repair of DOHC engines
+ 4. Repair of the diesel engine
+ 5. Cooling system
+ 6. Fuel system
+ 7. The fuel and exhaust system of models with system of injection of fuel
+ 8. Exhaust system and system of decrease in toxicity of exhaust gases
+ 9. Fuel systems of the diesel engine
+ 10. Engine electrical systems
+ 11. Transmission
+ 12. Mechanical transmission
+ 13. Automatic transmission
- 14. Power shafts
   14.2. General information
   + 14.3. Power shaft
   14.4. Intermediate shaft
   14.5. Replacement of hinges of a power shaft
   14.6. Replacement of covers of hinges of equal angular speeds
+ 15. Brake system
+ 16. Suspension bracket
+ 17. Body
+ 18. Electric equipment
+ 19. Check of malfunctions



POWER SHAFTS

14. Power shafts

14.1. Technical characteristic

Type
Different length, with hinges of equal angular speeds (CV JOINTS)

Tightening moments

Nut of fastening of a nave of a forward wheel:
– stage 1
130 Nanometer
– stage 2
To weaken completely
– stage 3
20 Nanometer
– stage 4
To tighten on a corner 80 °
Basic bearing of an intermediate shaft:
– a bearing arm to the block of cylinders
55 Nanometer
– a bearing support to an arm
18 Nanometer
The lower lever to the spherical hinge of a rack of a forward suspension bracket
70 Nanometer
Bolts of fastening of a wheel
110 Nanometer