Opel Vectra A
since 1988-1995 release
Repair and operation of the car
Vektr's Opel And
+
1. Maintenance instruction
+
1.1 Maintenance
+
2. Engine
+
3. Repair of DOHC engines
+
4. Repair of the diesel engine
+
5. Cooling system
+
6. Fuel system
+
7. The fuel and exhaust system of models with system of injection of fuel
+
8. Exhaust system and system of decrease in toxicity of exhaust gases
+
9. Fuel systems of the diesel engine
+
10. Engine electrical systems
+
11. Transmission
+
12. Mechanical transmission
+
13. Automatic transmission
+
14. Power shafts
+
15. Brake system
-
16. Suspension bracket
16.2. General information
16.3. Replacement of the bearing of a forward wheel
16.4. Forward lower frame
16.5. Rack of a forward suspension bracket
16.6. Lower lever of a forward suspension bracket
16.7. Replacement of plugs of the lower lever of a forward suspension bracket
16.8. Spherical hinge of the lower lever of a forward suspension bracket
16.9. Forward stabilizer of cross stability
16:10. Replacement of plugs of the forward stabilizer of a cross ustoycha of a vost
16:11. Adjustment of the bearing of a back wheel (SOHC model)
16:12. Replacement of the bearing of a back wheel (the SOHC model till 1993)
16:13. Replacement of the hug bearing of a back wheel (model since 1993)
16:14. A nave of a back wheel (model with the SOHC engine)
16:15. Back shock-absorber
16:16. Replacement of rubber elements of fastening of the back shock-absorber
16:17. Springs of a back suspension bracket (SOHC model)
16:18. Knot of longitudinal levers of a back suspension bracket (model with SOHC engines)
16:19. Back stabilizer of cross stability
16:20. Replacement of the plug of the longitudinal lever of a back suspension bracket
16:21. The fastener of a back nave (model with SOHC engines)
16:22. Check of system of the self-leveled back suspension bracket
16:23. Control system elements self-leveled a back suspension bracket
16:24. Replacement of the bearing of a back wheel (model with DOHC engines)
16:25. A nave of a back wheel (model with DOHC engines)
16:26. Knot of a back suspension bracket (model with DOHC engines)
16:27. The diagonal lever of a back suspension bracket (model with DOHC engines)
16:28. Back stabilizer of cross stability
16:29. Steering wheel
16:30. Centering of a steering wheel
16:31. Replacement of the elastic coupling of a shaft of steering transfer
16:32. Steering column
16:33. Repair of a steering column
16:34. Shock-absorber of steering transfer
+
16:35. Replacement of protection covers of steering transfer
16:36. Removal of air from system of steering with the amplifier
16:37. Pump of the amplifier of steering
16:38. Popolnitelny tank of system of the amplifier of steering
16:39. Pipes of cooling of liquid of the amplifier of steering
16:40. Tips of steering draft
16:41. Steering draft
16:42. Angles of installation of forward wheels
+
17. Body
+
18. Electric equipment
+
19. Check of malfunctions
16:19. Back stabilizer of cross stability
(models with SOHC engines)
Removal
Arrangement of a bolt of fastening of the back stabilizer of cross resistance to the longitudinal lever of a back suspension bracket
Arrangement of a clip of fastening of the back stabilizer of cross stability
PERFORMANCE ORDER
1.
Lift a back part of the car and fix on supports.
2.
Unscrew nuts and bolts, the fixing ends of the stabilizer of cross resistance to longitudinal levers of a back suspension bracket (see rice.
Arrangement of a bolt of fastening of the back stabilizer of cross resistance to the longitudinal lever of a back suspension bracket
).
3.
Unscrew nuts and bolts, the fixing clips of the stabilizer of cross resistance to a back torsion beam and take the stabilizer from under the car (see rice.
Arrangement of a clip of fastening of the back stabilizer of cross stability
).
4.
Check a condition of plugs of fastening of the stabilizer and if necessary, replace them.
5.
For replacement of plugs just pull together them since the ends of the stabilizer.
Installation
PERFORMANCE ORDER
1.
Installation is made in the sequence, the return to removal.
2.
Tighten all nuts and bolts the required moment.
home
