Opel Vectra A

since 1988-1995 release

Repair and operation of the car



Vektr's Opel And
+ 1. Maintenance instruction
+ 1.1 Maintenance
+ 2. Engine
+ 3. Repair of DOHC engines
+ 4. Repair of the diesel engine
+ 5. Cooling system
- 6. Fuel system
   6.2. General information
   6.3. Air filter
   6.4. The block of adjustment of temperature of the air coming to the engine
   6.5. Check of the fuel pump
   6.6. Removal and installation of the fuel pump
   6.7. Fuel tank
   6.8. Fuel level sensor
   6.9. Separator of vapors of fuel (l models 1,6 and 1,8)
   6.10. Accelerator pedal
   6.11. Accelerator cable
   6.12. Carburetor
   6.13. Removal and installation of the carburetor
   6.14. Adjustment of turns of idling and contents WITH
   6.15. Needle and float
   6.16. Vacuum diaphragm of a butterfly valve of the secondary camera
   6.17. Economizer diaphragm
   6.18. Accelerating pump
   6.19. Knot of the air automatic gate
   + 6.20. Vacuum blocks of movement of the air automatic gate
   6.21. Carburetor filter
   6.22. Adjustment of the shock-absorber of a butterfly valve
   6.23. Sensor of provision of a butterfly valve (automatic transmission)
   6.24. Valve check of increase in turns of idling
   6.25. The electromagnetic valve of idling on models of 1,8 l
   6.26. Inlet collector
+ 7. The fuel and exhaust system of models with system of injection of fuel
+ 8. Exhaust system and system of decrease in toxicity of exhaust gases
+ 9. Fuel systems of the diesel engine
+ 10. Engine electrical systems
+ 11. Transmission
+ 12. Mechanical transmission
+ 13. Automatic transmission
+ 14. Power shafts
+ 15. Brake system
+ 16. Suspension bracket
+ 17. Body
+ 18. Electric equipment
+ 19. Check of malfunctions


24bec775


6.6. Removal and installation of the fuel pump

Removal

Detachment of a fuel hose from the fuel pump on model of 1,6 l

Removal of the fuel pump on models of 1,6 l

PERFORMANCE ORDER
1. The fuel pump is located in the right back part of a cover of a head of the block of cylinders.
2. Remove a weight wire from the accumulator.
3. Disconnect fuel hoses from the fuel pump (see rice. A detachment of a fuel hose from the fuel pump on model of 1,6 l). If necessary mark hoses and close them the corresponding traffic jams.
4. Unscrew two bolts and remove the fuel pump from a cover of a head of the block of cylinders (see rice. Removal of the fuel pump on models of 1,6 l).
5. Remove the plastic sealing block.

Removal

PERFORMANCE ORDER
1. Installation is made in the sequence, the return to removal. Check correctness of connection of fuel hoses. Tighten bolts of fastening of the fuel pump the required moment.
2. Start the engine and check fuel system for existence of leaks. In the presence of leaks immediately switch off the engine and eliminate leak. At installation of the fuel pump start of the engine can longer last usual.