Opel Vectra A

since 1988-1995 release

Repair and operation of the car

Vektr's Opel And
+ 1. Maintenance instruction
+ 1.1 Maintenance
+ 2. Engine
+ 3. Repair of DOHC engines
+ 4. Repair of the diesel engine
+ 5. Cooling system
- 6. Fuel system
   6.2. General information
   6.3. Air filter
   6.4. The block of adjustment of temperature of the air coming to the engine
   6.5. Check of the fuel pump
   6.6. Removal and installation of the fuel pump
   6.7. Fuel tank
   6.8. Fuel level sensor
   6.9. Separator of vapors of fuel (l models 1,6 and 1,8)
   6.10. Accelerator pedal
   6.11. Accelerator cable
   6.12. Carburetor
   6.13. Removal and installation of the carburetor
   6.14. Adjustment of turns of idling and contents WITH
   6.15. Needle and float
   6.16. Vacuum diaphragm of a butterfly valve of the secondary camera
   6.17. Economizer diaphragm
   6.18. Accelerating pump
   6.19. Knot of the air automatic gate
   + 6.20. Vacuum blocks of movement of the air automatic gate
   6.21. Carburetor filter
   6.22. Adjustment of the shock-absorber of a butterfly valve
   6.23. Sensor of provision of a butterfly valve (automatic transmission)
   6.24. Valve check of increase in turns of idling
   6.25. The electromagnetic valve of idling on models of 1,8 l
   6.26. Inlet collector
+ 7. The fuel and exhaust system of models with system of injection of fuel
+ 8. Exhaust system and system of decrease in toxicity of exhaust gases
+ 9. Fuel systems of the diesel engine
+ 10. Engine electrical systems
+ 11. Transmission
+ 12. Mechanical transmission
+ 13. Automatic transmission
+ 14. Power shafts
+ 15. Brake system
+ 16. Suspension bracket
+ 17. Body
+ 18. Electric equipment
+ 19. Check of malfunctions


6.16. Vacuum diaphragm of a butterfly valve of the secondary camera



With malfunction it is necessary to replace assembled the block of a diaphragm of the secondary camera as repair of the block is not provided.


1. Using the vacuum pump with the manometer, create depression about 300 Mbar in the diaphragm block through a hose the closest from the carburetor case. Check that depression in the block kept a long time. In the presence of leaks eliminate it or replace sootvt a stvuyushchy element.


1. On early models remove the air filter. On later models disconnect the air duct from the air filter, then disconnect a vacuum hose and a hose of ventilation of a case from an air chamber. Unscrew three screws and remove an air chamber together with an air duct.
2. Disconnect a vacuum tube from the block of a vacuum diaphragm.
3. Using a screw-driver edge, disconnect the spherical hinge of draft of a diaphragm from draft of a secondary butterfly valve.
4. On models 1,6 and 1,8 of l unscrew two screws and remove a separator of vapors of fuel from an arm. Move a separator aside, but do not deform fuel hoses.
5. Unscrew three screws and remove the block of a vacuum diaphragm together with an arm from the carburetor case.


1. Installation is made in the sequence, the return to removal.