|
Opel Vectra Asince 1988-1995 releaseRepair and operation of the car |
|
Vektr's Opel And + 1. Maintenance instruction + 1.1 Maintenance + 2. Engine + 3. Repair of DOHC engines + 4. Repair of the diesel engine + 5. Cooling system - 6. Fuel system 6.2. General information 6.3. Air filter 6.4. The block of adjustment of temperature of the air coming to the engine 6.5. Check of the fuel pump 6.6. Removal and installation of the fuel pump 6.7. Fuel tank 6.8. Fuel level sensor 6.9. Separator of vapors of fuel (l models 1,6 and 1,8) 6.10. Accelerator pedal 6.11. Accelerator cable 6.12. Carburetor 6.13. Removal and installation of the carburetor 6.14. Adjustment of turns of idling and contents WITH 6.15. Needle and float 6.16. Vacuum diaphragm of a butterfly valve of the secondary camera 6.17. Economizer diaphragm 6.18. Accelerating pump 6.19. Knot of the air automatic gate + 6.20. Vacuum blocks of movement of the air automatic gate 6.21. Carburetor filter 6.22. Adjustment of the shock-absorber of a butterfly valve 6.23. Sensor of provision of a butterfly valve (automatic transmission) 6.24. Valve check of increase in turns of idling 6.25. The electromagnetic valve of idling on models of 1,8 l 6.26. Inlet collector + 7. The fuel and exhaust system of models with system of injection of fuel + 8. Exhaust system and system of decrease in toxicity of exhaust gases + 9. Fuel systems of the diesel engine + 10. Engine electrical systems + 11. Transmission + 12. Mechanical transmission + 13. Automatic transmission + 14. Power shafts + 15. Brake system + 16. Suspension bracket + 17. Body + 18. Electric equipment + 19. Check of malfunctions |
6.2. General information
Prevention The power supply system fuel consists of the fuel tank, the fuel pump, steam separator (only l models 1,6 and 1,8), the carburetor with the falling stream and the air filter with adjustment of temperature of the air coming to the engine. The fuel tank is installed in the back lower part of the car before a back suspension bracket. The mechanical fuel pump of diaphragm type is put in action by the clown of the camshaft. The separator of fuel vapors is used for stable supply of fuel to the carburetor. Vapors of fuel separate from the fuel coming to the carburetor therefore start of the hot engine improves. The air filter installed on the carburetor contains the replaceable filtering element. In front of the air filter the temperature regulator with the gate is established. The temperature regulator maintains temperature of the air coming to the engine at optimum level because the gate operated by a temperature regulator provides or receipt in the engine of cold air, or the air which is warmed up by a final collector. All engines installed on the Vectra cars can be operated on unleaded gasoline. |
|