Opel Vectra A

since 1988-1995 release

Repair and operation of the car



Vektr's Opel And
+ 1. Maintenance instruction
+ 1.1 Maintenance
+ 2. Engine
+ 3. Repair of DOHC engines
+ 4. Repair of the diesel engine
+ 5. Cooling system
- 6. Fuel system
   6.2. General information
   6.3. Air filter
   6.4. The block of adjustment of temperature of the air coming to the engine
   6.5. Check of the fuel pump
   6.6. Removal and installation of the fuel pump
   6.7. Fuel tank
   6.8. Fuel level sensor
   6.9. Separator of vapors of fuel (l models 1,6 and 1,8)
   6.10. Accelerator pedal
   6.11. Accelerator cable
   6.12. Carburetor
   6.13. Removal and installation of the carburetor
   6.14. Adjustment of turns of idling and contents WITH
   6.15. Needle and float
   6.16. Vacuum diaphragm of a butterfly valve of the secondary camera
   6.17. Economizer diaphragm
   6.18. Accelerating pump
   6.19. Knot of the air automatic gate
   + 6.20. Vacuum blocks of movement of the air automatic gate
   6.21. Carburetor filter
   6.22. Adjustment of the shock-absorber of a butterfly valve
   6.23. Sensor of provision of a butterfly valve (automatic transmission)
   6.24. Valve check of increase in turns of idling
   6.25. The electromagnetic valve of idling on models of 1,8 l
   6.26. Inlet collector
+ 7. The fuel and exhaust system of models with system of injection of fuel
+ 8. Exhaust system and system of decrease in toxicity of exhaust gases
+ 9. Fuel systems of the diesel engine
+ 10. Engine electrical systems
+ 11. Transmission
+ 12. Mechanical transmission
+ 13. Automatic transmission
+ 14. Power shafts
+ 15. Brake system
+ 16. Suspension bracket
+ 17. Body
+ 18. Electric equipment
+ 19. Check of malfunctions


24bec775


6.3. Air filter

Removal

Arrangement of the hose of air supply which is warmed up by an inlet collector to the carburetor

The place of connection of a hose of ventilation of a case to the case of the air filter

PERFORMANCE ORDER
1. Remove the filtering element of the air filter.
2. Take a hose of ventilation of a case from a fastening bracket on the left side of the case of the air filter.
3. Disconnect from the input channel of the air filter a branch pipe of air supply which is warmed up by an inlet collector and remove the case of the air filter from the carburetor (see rice. Arrangement of the hose of air supply which is warmed up by an inlet collector to the carburetor).
4. Incline the case of the air filter back and disconnect a hose of ventilation of a case from the lower part (see rice. The place of connection of a hose of ventilation of a case to the case of the air filter). In the presence disconnect a vacuum hose from the regulator of temperature coming to the air engine.
5. Remove consolidation from under the case of the air filter.

Installation

PERFORMANCE ORDER
1. Check a condition of the branch pipe of air supply which is warmed up final коллекто rum and, if necessary, replace it.
2. Establish the new consolidation located between the case of the air filter and the carburetor.
3. Connect a hose of ventilation of a case to a branch pipe in the lower part of the case of the air filter. In the presence of a podsoyeda to Nita a vacuum hose to the regulator of temperature of the air coming to the engine.
4. Install the case of the air filter on the carburetor. At the same time at the same time combine it with a branch pipe of air supply which is warmed up by a final collector.
5. Fix a hose of ventilation of a case by a plastic bracket on the left side of the case of the air filter.
6. Establish the filtering element of the air filter.