Opel Vectra A

since 1988-1995 release

Repair and operation of the car

Vektr's Opel And
+ 1. Maintenance instruction
+ 1.1 Maintenance
+ 2. Engine
+ 3. Repair of DOHC engines
+ 4. Repair of the diesel engine
+ 5. Cooling system
+ 6. Fuel system
+ 7. The fuel and exhaust system of models with system of injection of fuel
+ 8. Exhaust system and system of decrease in toxicity of exhaust gases
+ 9. Fuel systems of the diesel engine
+ 10. Engine electrical systems
+ 11. Transmission
+ 12. Mechanical transmission
+ 13. Automatic transmission
+ 14. Power shafts
+ 15. Brake system
+ 16. Suspension bracket
- 17. Body
   17.2. General information
   17.3. Security measures when carrying out welding works
   17.4. Care of a body
   17.5. Repair of insignificant damages of a body
   17.6. Repair of strong damages of a body
   17.7. Cowl
   17.8. Cowl lock
   17.9. Cowl lock cable
   17:10. Trunk lid (Sedan models)
   17:11. Lock of a trunk lid (Sedan model)
   17:12. Cylinder of the lock of a trunk lid (Sedan model)
   17:13. Back door (Hatchback models)
   17:14. Lock of a back door (Hatchback model)
   17:15. Cylinder of the lock of a back door (Hatchback model)
   17:16. Racks of a back door (Hatchback model)
   17:17. Doors
   17:18. Door upholstery
   17:19. Internal handle of opening of a door
   17:20. External handle of opening of a door
   17:21. Door lock cylinder
   17:22. Door lock
   17:23. Limiter of opening of a door
   17:24. Wind and back flew down
   17:25. Back triangular window leaves
   17:26. Door glass
   17:27. Window regulators
   17:28. External rear-view mirror
   17:29. Bumpers
   17:30. Front grille
   17:31. Windshield deflector
   17:32. Wheel arch inserts
   17:33. Lower protective plate (mudguard) of the engine
   17:34. Folding shutter of a fuel-filling mouth of the fuel tank
   - 17:35. Hatch elements
      17.35.2. Gutter
      17.35.3. Sun-protection screen
      17.35.4. Crank drive
   17:36. Finishing of an interior
   + 17:37. Panels of finishing of the dashboard
   17:38. Central console
   17:39. Ceiling
   17:40. Sitting (without mechanisms of a tension of seat belts)
   17:41. Seat belts
   17:42. Seat belt tension mechanism
   17:43. Forward sitting with the seat belt tension mechanism
+ 18. Electric equipment
+ 19. Check of malfunctions

17.35.4. Crank drive

Removal

Unscrewing of the screw of fastening of the panel of finishing of a ceiling

Removal of the panel of finishing from a ceiling

Arrangement of screws of fastening of a crank

PERFORMANCE ORDER

1. Remove finishing and unscrew the screw of fastening of the handle of the drive of a crank and remove a crank from a drive axis.

2. Remove a weight wire from the accumulator, then remove a plafond of illumination of salon from finishing of a ceiling and disconnect from it the electric socket.

3. Unscrew two screws and remove the finishing panel from a ceiling (see rice. Unscrewing of the screw of fastening of the panel of finishing of a ceiling, Removal of the panel of finishing from a ceiling).

4. Unscrew two screws and remove the crank drive in collecting (see rice. Arrangement of screws of fastening of a crank).

Installation

Installation is made in the sequence, the return to removal taking into account the next moments...

PERFORMANCE ORDER

1. Before installation of the handle adjust the crank drive as follows.

2. Temporarily install the handle by the face forward and press the blocking button.

3. Remove the handle of a crank and manually turn the leading gear wheel of a crank counterclockwise against the stop.

4. Install the crank handle so that it was directed forward, then screw in the screw of fastening and establish finishing.

home