During the work with the mechanism of a tension of a seat belt of forward sitting be careful. Before carrying out any works on front seats block the seat belt mechanism cylinder for what install a safety fork in the cylinder.
Removal
Installation of a fork of safety in a groove in a back part of the cylinder of a spring
Elements of fastening of an external guide of forward sitting
1 – fastening bolt; 2 – the safety fork inserted into the spring cylinder;
PERFORMANCE ORDER
1. Unscrew the fastening screw from a forward part of decorative finishing of a guide of forward sitting, then release a back clamp and move decorative finishing back.
2. Remove decorative finishing from a back part of an internal guide of forward sitting.
3. The plastic fork of safety for the mechanism of a tension of a seat belt is usually fixed from the outer side of the cylinder of a spring of the mechanism of a tension.
1. Installation is made in the sequence, the return to removal. It is recommended to use new bolts for fastening of guides of sitting to a floor. You make tightening of bolts of fastening in the following order – back internal, forward internal, back external, forward external.
