Opel Vectra A

since 1988-1995 release

Repair and operation of the car

Vektr's Opel And
+ 1. Maintenance instruction
+ 1.1 Maintenance
+ 2. Engine
+ 3. Repair of DOHC engines
+ 4. Repair of the diesel engine
+ 5. Cooling system
+ 6. Fuel system
+ 7. The fuel and exhaust system of models with system of injection of fuel
+ 8. Exhaust system and system of decrease in toxicity of exhaust gases
+ 9. Fuel systems of the diesel engine
+ 10. Engine electrical systems
+ 11. Transmission
+ 12. Mechanical transmission
+ 13. Automatic transmission
+ 14. Power shafts
+ 15. Brake system
+ 16. Suspension bracket
- 17. Body
   17.2. General information
   17.3. Security measures when carrying out welding works
   17.4. Care of a body
   17.5. Repair of insignificant damages of a body
   17.6. Repair of strong damages of a body
   17.7. Cowl
   17.8. Cowl lock
   17.9. Cowl lock cable
   17:10. Trunk lid (Sedan models)
   17:11. Lock of a trunk lid (Sedan model)
   17:12. Cylinder of the lock of a trunk lid (Sedan model)
   17:13. Back door (Hatchback models)
   17:14. Lock of a back door (Hatchback model)
   17:15. Cylinder of the lock of a back door (Hatchback model)
   17:16. Racks of a back door (Hatchback model)
   17:17. Doors
   17:18. Door upholstery
   17:19. Internal handle of opening of a door
   17:20. External handle of opening of a door
   17:21. Door lock cylinder
   17:22. Door lock
   17:23. Limiter of opening of a door
   17:24. Wind and back flew down
   17:25. Back triangular window leaves
   17:26. Door glass
   17:27. Window regulators
   17:28. External rear-view mirror
   17:29. Bumpers
   17:30. Front grille
   17:31. Windshield deflector
   17:32. Wheel arch inserts
   17:33. Lower protective plate (mudguard) of the engine
   17:34. Folding shutter of a fuel-filling mouth of the fuel tank
   + 17:35. Hatch elements
   17:36. Finishing of an interior
   + 17:37. Panels of finishing of the dashboard
   17:38. Central console
   17:39. Ceiling
   17:40. Sitting (without mechanisms of a tension of seat belts)
   17:41. Seat belts
   17:42. Seat belt tension mechanism
   17:43. Forward sitting with the seat belt tension mechanism
+ 18. Electric equipment
+ 19. Check of malfunctions

17:40. Sitting (without mechanisms of a tension of seat belts)

FORWARD SITTING

Removal

Removal of an external decorative overlay of a guide of sitting

Removal of finishing from a back part of an internal guide of sitting

Vyvinchivaniye and removal of a bolt of fastening of a guide of forward sitting to a floor

PERFORMANCE ORDER

1. Unscrew the fastening screw from the forward party of an external decorative overlay of a guide of sitting, then remove a slip (see rice. Removal of an external decorative overlay of a guide of sitting).

2. Remove finishing from a back part of an internal guide of sitting (see rice. Removal of finishing from a back part of an internal guide of sitting).

3. Unscrew four bolts, fixing a sitting guide to a floor, then remove sitting together with guides (see fig. of Vyvinchivaniye and removal of a bolt of fastening of a guide of forward sitting to a floor).

4. If necessary remove I direct shchy from sitting.

Installation

It is recommended to use new bolts of fastening of guides of sitting to a floor.

PERFORMANCE ORDER

1. Installation is made in the sequence, the return to removal.

PILLOW OF BACK SITTING (EARLY MODELS)

Removal

Extraction of a hinged finger of fastening of a pillow of back sitting on models with SOHC engines

PERFORMANCE ORDER

1. Lift a back part of a pillow of sitting and move it for access to hinged fingers from the forward party of a pillow of back sitting forward.

2. Remove a lock ring from a hinged finger and take a hinged finger (see rice. Extraction of a hinged finger of fastening of a pillow of back sitting on models with SOHC engines).

3. Take a pillow of back sitting from the car.

Installation

PERFORMANCE ORDER

1. Installation is made in the sequence, the return to removal.

PILLOW OF BACK SITTING (LATE MODELS)

Removal

PERFORMANCE ORDER

1. Having pulled a pillow from two parties, release it from clamps and take from interior of the car.

Installation

PERFORMANCE ORDER

1. Installation is made in the sequence, the return to removal.

BACK OF BACK SITTING (CONTINUOUS)

Removal

PERFORMANCE ORDER

1. Reject forward or remove a pillow of back sitting and incline a back of back sitting forward.

2. In the presence unbend a uvula on the panel of a body and take off two rubber belts fixing sitting back end faces to the body panel.

3. Take percussion caps of fastening and move the finishing closing hinges on a back of back sitting.

4. Unscrew screws, the fixing hinges to a back of back sitting and take a back from interior of the car.

Installation

PERFORMANCE ORDER

1. Installation is made in the sequence, the return to removal.

BACK OF BACK SITTING (SEPARATE)

Removal

Arrangement of the uvula fixing a rubber belt of a back of back sitting

Unscrewing of the screw of fastening of the hinge to a back of back sitting

Arrangement of the central hinge of fastening of a back of back sitting

PERFORMANCE ORDER

1. Incline forward or remove a pillow of back sitting.

2. In the presence unbend a uvula on the panel of a body and take off the rubber belt fixing the corresponding half of a back of sitting to a body (see rice. Arrangement of the uvula fixing a rubber belt of a back of back sitting).

3. Take percussion caps and move the finishing closing hinges of a back of back sitting back.

4. Unscrew screws, the fixing hinges to a back of back sitting (see rice. Unscrewing of the screw of fastening of the hinge to a back of back sitting).

5. In the central part of a back of back sitting wring out a sitting pillow from the central arm for access to a nut and a bolt of fastening. Keep in mind that the bolt passes through two half of a back of back sitting (see rice. Arrangement of the central hinge of fastening of a back of back sitting).

Unscrew a nut and take a bolt and, being careful, remove a back of back sitting.

Installation

PERFORMANCE ORDER

1. Installation is made in the sequence, the return to removal.

2. Fix rubber belts of a back of back sitting by bending back of a uvula.

home