Vektr's Opel And
+ 1. Maintenance instruction
+ 1.1 Maintenance
+ 2. Engine
+ 3. Repair of DOHC engines
+ 4. Repair of the diesel engine
+ 5. Cooling system
+ 6. Fuel system
+ 7. The fuel and exhaust system of models with system of injection of fuel
+ 8. Exhaust system and system of decrease in toxicity of exhaust gases
+ 9. Fuel systems of the diesel engine
+ 10. Engine electrical systems
+ 11. Transmission
+ 12. Mechanical transmission
+ 13. Automatic transmission
+ 14. Power shafts
+ 15. Brake system
+ 16. Suspension bracket
- 17. Body
17.2. General information
17.3. Security measures when carrying out welding works
17.4. Care of a body
17.5. Repair of insignificant damages of a body
17.6. Repair of strong damages of a body
17.7. Cowl
17.8. Cowl lock
17.9. Cowl lock cable
17:10. Trunk lid (Sedan models)
17:11. Lock of a trunk lid (Sedan model)
17:12. Cylinder of the lock of a trunk lid (Sedan model)
17:13. Back door (Hatchback models)
17:14. Lock of a back door (Hatchback model)
17:15. Cylinder of the lock of a back door (Hatchback model)
17:16. Racks of a back door (Hatchback model)
17:17. Doors
17:18. Door upholstery
17:19. Internal handle of opening of a door
17:20. External handle of opening of a door
17:21. Door lock cylinder
17:22. Door lock
17:23. Limiter of opening of a door
17:24. Wind and back flew down
17:25. Back triangular window leaves
17:26. Door glass
17:27. Window regulators
17:28. External rear-view mirror
17:29. Bumpers
17:30. Front grille
17:31. Windshield deflector
17:32. Wheel arch inserts
17:33. Lower protective plate (mudguard) of the engine
17:34. Folding shutter of a fuel-filling mouth of the fuel tank
+ 17:35. Hatch elements
17:36. Finishing of an interior
+ 17:37. Panels of finishing of the dashboard
17:38. Central console
17:39. Ceiling
17:40. Sitting (without mechanisms of a tension of seat belts)
17:41. Seat belts
17:42. Seat belt tension mechanism
17:43. Forward sitting with the seat belt tension mechanism
+ 18. Electric equipment
+ 19. Check of malfunctions
|
REPLACEMENT FLEW DOWN
Mirror glass removal with electric management of a mirror
| PERFORMANCE ORDER |
| 1. Replacement of glass of a mirror can be made without removal of a mirror from the car. On models with electric management of mirrors remove a weight wire from the accumulator. |
| 2. Using a screw-driver edge as the lever and being careful, remove mirror glass from the spherical hinge and in the presence disconnect the electric socket of a heater from glass. Be careful not to break glass (see rice. Mirror glass removal with electric management of a mirror). |
| 3. At installation connect the electric socket and just install a mirror on the spherical hinge. |
|
REMOVAL AND INSTALLATION OF THE MIRROR
Removal of a decorative overlay of a mirror from the inside of a door
Unscrewing of the screw of fastening of a mirror
Detachment электричес whom mirror drive socket
Consolidation arrangement on the mirror case
REMOVAL AND INSTALLATION OF THE ELECTRIC MOTOR OF THE DRIVE OF THE MIRROR
Removal
Arrangement of screws of fastening of the electric motor of a mirror
Installation
| PERFORMANCE ORDER |
| 1. Installation is made in the sequence, the return to removal, but at the same time check that the electrical wiring of the engine is located behind the engine. |
|
|
|
