Opel Vectra A

since 1988-1995 release

Repair and operation of the car

Vektr's Opel And
+ 1. Maintenance instruction
+ 1.1 Maintenance
+ 2. Engine
+ 3. Repair of DOHC engines
+ 4. Repair of the diesel engine
+ 5. Cooling system
+ 6. Fuel system
+ 7. The fuel and exhaust system of models with system of injection of fuel
+ 8. Exhaust system and system of decrease in toxicity of exhaust gases
+ 9. Fuel systems of the diesel engine
+ 10. Engine electrical systems
+ 11. Transmission
+ 12. Mechanical transmission
+ 13. Automatic transmission
+ 14. Power shafts
+ 15. Brake system
+ 16. Suspension bracket
- 17. Body
   17.2. General information
   17.3. Security measures when carrying out welding works
   17.4. Care of a body
   17.5. Repair of insignificant damages of a body
   17.6. Repair of strong damages of a body
   17.7. Cowl
   17.8. Cowl lock
   17.9. Cowl lock cable
   17:10. Trunk lid (Sedan models)
   17:11. Lock of a trunk lid (Sedan model)
   17:12. Cylinder of the lock of a trunk lid (Sedan model)
   17:13. Back door (Hatchback models)
   17:14. Lock of a back door (Hatchback model)
   17:15. Cylinder of the lock of a back door (Hatchback model)
   17:16. Racks of a back door (Hatchback model)
   17:17. Doors
   17:18. Door upholstery
   17:19. Internal handle of opening of a door
   17:20. External handle of opening of a door
   17:21. Door lock cylinder
   17:22. Door lock
   17:23. Limiter of opening of a door
   17:24. Wind and back flew down
   17:25. Back triangular window leaves
   17:26. Door glass
   17:27. Window regulators
   17:28. External rear-view mirror
   17:29. Bumpers
   17:30. Front grille
   17:31. Windshield deflector
   17:32. Wheel arch inserts
   17:33. Lower protective plate (mudguard) of the engine
   17:34. Folding shutter of a fuel-filling mouth of the fuel tank
   + 17:35. Hatch elements
   17:36. Finishing of an interior
   + 17:37. Panels of finishing of the dashboard
   17:38. Central console
   17:39. Ceiling
   17:40. Sitting (without mechanisms of a tension of seat belts)
   17:41. Seat belts
   17:42. Seat belt tension mechanism
   17:43. Forward sitting with the seat belt tension mechanism
+ 18. Electric equipment
+ 19. Check of malfunctions

17:26. Door glass

GENERAL INFORMATION

Unscrewing of the screw of fastening of a back guide of glass

Unscrewing of the second screw of fastening of a back guide of glass

Removal of a back guide of glass from a door

FORWARD DOOR

Removal

Arrangement of the plastic limiter of the top guide of glass

Arrangement of screws of fastening of the lower part of a guide to a door

PERFORMANCE ORDER

1. Lower door glass down to an emphasis, then remove an upholstery of a door and a protective film.

2. Unscrew the bolt fixing a back guide of glass and take it through an aperture at doors.

3. Remove the lower consolidation of glass from the internal and outer side.

4. Remove the plastic limiter from the top guide of glass (see rice. Arrangement of the plastic limiter of the top guide of glass).

5. Unscrew two screws fixing the lower part of a guide to a door and lower a guide (see rice. An arrangement of screws of fastening of the lower part of a guide to a door).

Incline door glass forward and extract it through a window aperture.

Installation

PERFORMANCE ORDER

1. Installation is made in the sequence, the return to removal. If necessary adjust a corner I direct Russian cabbage soup after weakening of two screws of fastening. Establish a door upholstery.

2. On models with power windows program the control unit as follows.

3. Close all doors and include ignition.

4. Close each glass, using the corresponding switch and after when glass is lifted up to an emphasis, hold the switch pressed 5 more sec.

BACK DOOR

Removal

Removal of internal consolidation from the lower part of an aperture of a window

Removal of glass from a back door

PERFORMANCE ORDER

1. Lower door glass down to an emphasis, then remove an upholstery of a door and a protective film.

2. Remove consolidation of a back guide of glass, then unscrew the opened screw fixing a back guide of glass.

3. Unscrew the second screw of fastening of a back guide of glass, access to which is possible from the inside of a door, then remove a glass guide from a door.

4. Remove internal and external consolidations from the lower part of an aperture of a window (see rice. Removal of internal consolidation from the lower part of an aperture of a window).

5. Incline glass forward and extract it from a window aperture up (see rice. Removal of glass from a back door).

Installation

PERFORMANCE ORDER

1. Installation is made in the sequence, the return to removal. Establish an internal upholstery of a door.

2. On models with power windows program the control unit as follows.

3. Close all doors and include ignition.

4. Close each glass, using the corresponding switch and after when glass is lifted up to an emphasis, hold the switch pressed 5 more sec.

home