Opel Vectra A

since 1988-1995 release

Repair and operation of the car



Vektr's Opel And
+ 1. Maintenance instruction
+ 1.1 Maintenance
+ 2. Engine
+ 3. Repair of DOHC engines
+ 4. Repair of the diesel engine
+ 5. Cooling system
+ 6. Fuel system
+ 7. The fuel and exhaust system of models with system of injection of fuel
+ 8. Exhaust system and system of decrease in toxicity of exhaust gases
+ 9. Fuel systems of the diesel engine
+ 10. Engine electrical systems
+ 11. Transmission
+ 12. Mechanical transmission
+ 13. Automatic transmission
+ 14. Power shafts
+ 15. Brake system
+ 16. Suspension bracket
- 17. Body
   17.2. General information
   17.3. Security measures when carrying out welding works
   17.4. Care of a body
   17.5. Repair of insignificant damages of a body
   17.6. Repair of strong damages of a body
   17.7. Cowl
   17.8. Cowl lock
   17.9. Cowl lock cable
   17:10. Trunk lid (Sedan models)
   17:11. Lock of a trunk lid (Sedan model)
   17:12. Cylinder of the lock of a trunk lid (Sedan model)
   17:13. Back door (Hatchback models)
   17:14. Lock of a back door (Hatchback model)
   17:15. Cylinder of the lock of a back door (Hatchback model)
   17:16. Racks of a back door (Hatchback model)
   17:17. Doors
   17:18. Door upholstery
   17:19. Internal handle of opening of a door
   17:20. External handle of opening of a door
   17:21. Door lock cylinder
   17:22. Door lock
   17:23. Limiter of opening of a door
   17:24. Wind and back flew down
   17:25. Back triangular window leaves
   17:26. Door glass
   17:27. Window regulators
   17:28. External rear-view mirror
   17:29. Bumpers
   17:30. Front grille
   17:31. Windshield deflector
   17:32. Wheel arch inserts
   17:33. Lower protective plate (mudguard) of the engine
   17:34. Folding shutter of a fuel-filling mouth of the fuel tank
   + 17:35. Hatch elements
   17:36. Finishing of an interior
   + 17:37. Panels of finishing of the dashboard
   17:38. Central console
   17:39. Ceiling
   17:40. Sitting (without mechanisms of a tension of seat belts)
   17:41. Seat belts
   17:42. Seat belt tension mechanism
   17:43. Forward sitting with the seat belt tension mechanism
+ 18. Electric equipment
+ 19. Check of malfunctions
24bec775



17:17. Doors

FORWARD DOOR

Removal

Detachment of the electric socket from a forward end face of a door

PERFORMANCE ORDER
1. Hinges of a door are welded on a door and a rack of a body.
2. Prop up a door supports or jacks, having laid between them and a door pure rags.
3. If at doors there are electric drives, remove a weight wire from the accumulator and disconnect the electric socket from a forward end face of a door. For a detachment of the electric socket unscrew an external ring of the socket and take the socket (see the drawing).
4. Using a punch, beat out a cylindrical pin of a rotary axis of the limiter of opening of a door.
5. Remove plastic covers from hinged fingers of a door. A drift beat out hinged fingers and remove a door.

Installation

PERFORMANCE ORDER
1. Installation is made in the sequence, the return to removal. At installation use a new cylindrical pin of fastening of the limiter of opening of a door.
2. Because hinges of a door are welded on a door and a rack therefore in need of adjustment use special tools to bend hinges.
3. Check that the door lock accurately comes on the shock plate located on a rack. If adjustment is necessary, weaken the screws fixing a shock plate, move a shock plate and tighten fastening screws.

BACK DOOR

Operation on removal and installation of a back door is similar to operation on removal and installation of a forward door. However on models with the central lock or power windows remove a door upholstery, disconnect electric sockets and take them through a forward end face of a door.