Opel Vectra A

since 1988-1995 release

Repair and operation of the car



Vektr's Opel And
+ 1. Maintenance instruction
+ 1.1 Maintenance
+ 2. Engine
+ 3. Repair of DOHC engines
+ 4. Repair of the diesel engine
+ 5. Cooling system
+ 6. Fuel system
+ 7. The fuel and exhaust system of models with system of injection of fuel
+ 8. Exhaust system and system of decrease in toxicity of exhaust gases
+ 9. Fuel systems of the diesel engine
+ 10. Engine electrical systems
+ 11. Transmission
+ 12. Mechanical transmission
+ 13. Automatic transmission
+ 14. Power shafts
- 15. Brake system
   15.2. General information
   15.3. Anti-blocking system of brakes (ABS)
   15.4. Pumping of the hydraulic brake system
   + 15.5. Replacement of front brake shoes
   15.6. Replacement of back brake shoes on disk brakes
   + 15.7. Replacement of back brake shoes on drum brakes
   15.8. Replacement of brake shoes of the emergency brake on back disk brakes
   15.9. Support of a forward brake
   15:10. Support of a back disk brake
   15:11. Brake disk
   15:12. Forward brake disk
   15:13. A back brake disk on models with SOHC engines
   15:14. A back brake disk on models with DOHC engines
   15:15. Brake drum
   15:16. Back working brake cylinder
   15:17. Brake board of a back brake
   15:18. Protection cover of a forward brake disk
   15:19. Main brake cylinder
   15:20. Repair of the main brake cylinder (model without ABS)
   15:21. Vacuum amplifier of brakes
   15:22. Hydraulic ABS modulator
   15:23. The ABS sensors installed on wheels
   15:24. ABS control unit
   15:25. ABS relay (only ABS-2E system)
   15:26. Valves of adjustment of pressure
   15:27. Brake pipelines and hoses
   15:28. Adjustment of the emergency brake
   + 15:29. Cable of the emergency brake
   15:30. Lever of the emergency brake
   15:31. Brake pedal
+ 16. Suspension bracket
+ 17. Body
+ 18. Electric equipment
+ 19. Check of malfunctions



15:31. Brake pedal

Removal

Arrangement of a spring bracket of a hinged finger, the fixing fork of thirst of the vacuum amplifier of brakes for a brake pedal

The brake pedal removed from the car
1 – blocking bracket;
2 – returnable spring of a pedal;
3 – hinged finger of a pedal

PERFORMANCE ORDER
1. Remove a weight wire from the accumulator.
2. Remove the lower finishing of the dashboard in deepening for the driver's legs.
3. Disconnect the electric socket from the stoplight switch, then counterclockwise unscrew the switch and take it from an arm.
4. Remove a spring bracket on the right side of a hinged finger, the fixing fork of thirst of the vacuum amplifier of brakes for a brake pedal (see rice. Arrangement of a spring bracket of a hinged finger, the fixing fork of thirst of the vacuum amplifier of brakes for a brake pedal).
5. Using flat-nose pliers, remove the end of a returnable spring from a pedal of a brake and take the hinged finger fixing a fork of thirst of the vacuum amplifier of brakes for a brake pedal (see rice. The brake pedal removed from the car).
6. Remove a blocking bracket from the left end of a hinged finger of a pedal.
7. Since the left end of a hinged finger unscrew a nut and take a hinged finger from a brake pedal arm. Remove washers from a hinged finger of a pedal of a brake and note their arrangement.
8. Remove a pedal together with a returnable spring.

Installation

Installation is made in the sequence, the return to removal taking into account the next moments...

PERFORMANCE ORDER
1. Before installation of a pedal of a brake check correctness of an arrangement of a returnable spring.
2. Apply a thin film of lubricant on the basis of a molybdenum disulfide on a hinged finger of a pedal of a brake.
3. Check that washers on a hinged finger of a pedal of a brake are established, as well as before removal.