Vektr's Opel And
+ 1. Maintenance instruction
+ 1.1 Maintenance
+ 2. Engine
+ 3. Repair of DOHC engines
+ 4. Repair of the diesel engine
+ 5. Cooling system
+ 6. Fuel system
+ 7. The fuel and exhaust system of models with system of injection of fuel
+ 8. Exhaust system and system of decrease in toxicity of exhaust gases
+ 9. Fuel systems of the diesel engine
+ 10. Engine electrical systems
+ 11. Transmission
+ 12. Mechanical transmission
+ 13. Automatic transmission
+ 14. Power shafts
- 15. Brake system
15.2. General information
15.3. Anti-blocking system of brakes (ABS)
15.4. Pumping of the hydraulic brake system
+ 15.5. Replacement of front brake shoes
15.6. Replacement of back brake shoes on disk brakes
+ 15.7. Replacement of back brake shoes on drum brakes
15.8. Replacement of brake shoes of the emergency brake on back disk brakes
15.9. Support of a forward brake
15:10. Support of a back disk brake
15:11. Brake disk
15:12. Forward brake disk
15:13. A back brake disk on models with SOHC engines
15:14. A back brake disk on models with DOHC engines
15:15. Brake drum
15:16. Back working brake cylinder
15:17. Brake board of a back brake
15:18. Protection cover of a forward brake disk
15:19. Main brake cylinder
15:20. Repair of the main brake cylinder (model without ABS)
15:21. Vacuum amplifier of brakes
15:22. Hydraulic ABS modulator
15:23. The ABS sensors installed on wheels
15:24. ABS control unit
15:25. ABS relay (only ABS-2E system)
15:26. Valves of adjustment of pressure
15:27. Brake pipelines and hoses
15:28. Adjustment of the emergency brake
+ 15:29. Cable of the emergency brake
15:30. Lever of the emergency brake
15:31. Brake pedal
+ 16. Suspension bracket
+ 17. Body
+ 18. Electric equipment
+ 19. Check of malfunctions
|
MODELS WITH BACK DRUM BRAKES
Removal
| PERFORMANCE ORDER |
| 1. In the presence take off a wheel cap, then weaken bolts of fastening of a back wheel. Lift a back part of the car and record on supports. Remove a back wheel. |
| 2. Remove the brake drum. |
| 3. Remove a nave of a back wheel. |
| 4. Remove brake shoes. |
| 5. Remove the working brake cylinder. |
| 6. Using a screw-driver edge as the lever, remove the plate fixing a cable of the emergency brake to a brake board. |
| 7. Unscrew four bolts and remove a pin of a nave and a brake board. |
|
Installation
| PERFORMANCE ORDER |
| 1. Installation is made in the sequence, the return to removal taking into account the next moments. |
| 2. Apply a thin film of lithium lubricant on a back surface of a flange of a pin of a nave. |
| 3. Tighten bolts of fastening of a brake board / pin of a nave the required moment. |
| 4. Install the working brake cylinder. |
| 5. Establish brake shoes. |
| 6. Establish a nave of a back wheel. |
| 7. Install the brake drum. |
| 8. Check and, if necessary, adjust the emergency brake. |
|
MODELS WITH BACK DISK BRAKES WITH THE SOHC ENGINE
Removal
| PERFORMANCE ORDER |
| 1. In the presence take off a wheel cap, then weaken bolts of fastening of a back wheel. Lift a back part of the car and record on supports. Remove a back wheel. |
| 2. Remove the brake drum. |
| 3. Remove a nave of a back wheel. |
| 4. Remove brake shoes. |
| 5. Remove the working brake cylinder. |
| 6. Using a screw-driver edge as the lever, remove the plate fixing a cable of the emergency brake to a brake board. |
| 7. Remove a nave / a brake disk of a back wheel. |
| 8. Remove brake shoes of the emergency brake. |
| 9. Unscrew four bolts and remove a pin of a nave and a brake board. |
|
Installation
Installation is made in the sequence, the return to removal taking into account the next moments...
| PERFORMANCE ORDER |
| 1. Apply a thin film of lithium lubricant on a back surface of a flange of a pin of a nave. |
| 2. Tighten bolts of fastening of a brake board / pin of a nave the required moment. |
| 3. Establish blocks of the emergency brake. |
| 4. Establish a nave / a brake disk of a back wheel. |
| 5. Check work and, if necessary, adjust the emergency brake. |
|
DOHC MODELS
Removal
| PERFORMANCE ORDER |
| 1. In the presence take off a wheel cap, then weaken bolts of fastening of a back wheel. Lift a back part of the car and record on supports. Remove a back wheel. |
| 2. Remove a brake disk. |
| 3. Remove a nave of a back wheel. |
| 4. Remove blocks of the emergency brake. |
| 5. Unscrew four bolts and remove a brake board of the emergency brake. |
|
Installation
Installation is made in the sequence, the return to removal taking into account the next moments...
| PERFORMANCE ORDER |
| 1. Establish blocks of the emergency brake. |
| 2. Establish a nave of a back wheel. |
| 3. Establish a brake disk. |
| 4. Check and, if necessary, adjust the emergency brake. |
|
|
|
