Vektr's Opel And
+ 1. Maintenance instruction
+ 1.1 Maintenance
+ 2. Engine
+ 3. Repair of DOHC engines
+ 4. Repair of the diesel engine
- 5. Cooling system
5.2. General information
5.3. Antifreeze
5.4. Washing of the cooling system
5.5. Discharge of cooling liquid
5.6. Filling of the cooling system
5.7. A radiator (models with the mechanical transmission)
5.8. A radiator (models with the automatic transmission)
5.9. Check and cleaning of a radiator
5.10. Thermostat
5.11. Check of operability of the thermostat
5.12. Water pump
5.13. Radiator fan
5.14. Broad tank and sensor of level of cooling liquid
5.15. Sensor of the index of temperature of cooling liquid
5.16. Radiator fan thermal sensor
5.17. Control panel of a heater
5.18. Heater radiator
5.19. Heater fan engine
5.20. Ventilation nozzles
+ 6. Fuel system
+ 7. The fuel and exhaust system of models with system of injection of fuel
+ 8. Exhaust system and system of decrease in toxicity of exhaust gases
+ 9. Fuel systems of the diesel engine
+ 10. Engine electrical systems
+ 11. Transmission
+ 12. Mechanical transmission
+ 13. Automatic transmission
+ 14. Power shafts
+ 15. Brake system
+ 16. Suspension bracket
+ 17. Body
+ 18. Electric equipment
+ 19. Check of malfunctions
|
CENTRAL NOZZLES
Removal
Use of an edge of the screw-driver for removal of central snuffled systems of ventilation
Removal of central snuffled systems of ventilation from the dashboard
Installation
| PERFORMANCE ORDER |
| 1. Installation is made in the sequence, the return to removal. If the casing was removed snuffled ventilation, move the lever of the regulator of a stream of air to the limiter, then insert into a fastening element, at the same time the wheel of the regulator has to be in situation 0. |
|
NOZZLES FROM THE PASSENGER
Removal
| PERFORMANCE ORDER |
| 1. Using a screw-driver edge as the lever, and having enclosed under it pure rags, being careful, remove a nozzle from the dashboard. |
| 2. If necessary remove a casing of central snuffled ventilation as follows. Establish a wheel of adjustment of a stream of air in situation 0, then pull the lever aside and release it from a fastening element. |
| 3. Unscrew the screw, the fixing casing to the dashboard, then release brackets of fastening and take a casing from the panel. |
|
Installation
| PERFORMANCE ORDER |
| 1. Installation is made in the sequence, the return to removal. If the casing was removed snuffled ventilation, move the lever of the regulator of a stream of air to the limiter, then insert into a fastening element, at the same time the wheel of the regulator has to be in situation 0. |
|
NOZZLES FROM THE DRIVER
Removal
| PERFORMANCE ORDER |
| 1. Using a screw-driver edge as the lever, and having enclosed under it pure rags, being careful, remove a nozzle from the dashboard. |
| 2. If necessary remove a casing of central snuffled ventilation as follows. Establish a wheel of adjustment of a stream of air in situation 0, then pull the lever aside and release it from a fastening element. |
|
Installation
| PERFORMANCE ORDER |
| 1. Installation is made in the sequence, the return to removal. If the casing was removed snuffled ventilation, move the lever of the regulator of a stream of air to the limiter, then insert into a fastening element, at the same time the wheel of the regulator has to be in situation 0. |
|
NOZZLES OBDUVA OF SIDE GLASSES
Removal
| PERFORMANCE ORDER |
| 1. Using an edge of the thin screw-driver as the lever, having enclosed under it pure rags and being careful, take nozzles from the dashboard. |
|
Installation
| PERFORMANCE ORDER |
| 1. For installation just press nozzles into the dashboard. |
|
|
|
