The device, service, repair Vektr's Opel And - 5.18. Heater radiator//1988-1995 /

Opel Vectra A

since 1988-1995 release

Repair and operation of the car



Vektr's Opel And
+ 1. Maintenance instruction
+ 1.1 Maintenance
+ 2. Engine
+ 3. Repair of DOHC engines
+ 4. Repair of the diesel engine
- 5. Cooling system
   5.2. General information
   5.3. Antifreeze
   5.4. Washing of the cooling system
   5.5. Discharge of cooling liquid
   5.6. Filling of the cooling system
   5.7. A radiator (models with the mechanical transmission)
   5.8. A radiator (models with the automatic transmission)
   5.9. Check and cleaning of a radiator
   5.10. Thermostat
   5.11. Check of operability of the thermostat
   5.12. Water pump
   5.13. Radiator fan
   5.14. Broad tank and sensor of level of cooling liquid
   5.15. Sensor of the index of temperature of cooling liquid
   5.16. Radiator fan thermal sensor
   5.17. Control panel of a heater
   5.18. Heater radiator
   5.19. Heater fan engine
   5.20. Ventilation nozzles
+ 6. Fuel system
+ 7. The fuel and exhaust system of models with system of injection of fuel
+ 8. Exhaust system and system of decrease in toxicity of exhaust gases
+ 9. Fuel systems of the diesel engine
+ 10. Engine electrical systems
+ 11. Transmission
+ 12. Mechanical transmission
+ 13. Automatic transmission
+ 14. Power shafts
+ 15. Brake system
+ 16. Suspension bracket
+ 17. Body
+ 18. Electric equipment
+ 19. Check of malfunctions
24bec775 24bec775



5.18. Heater radiator

Removal

Removal of a plastic casing of a radiator of a heater

Unscrewing of the screw of fastening of a belt of a radiator of a heater

PERFORMANCE ORDER
1. Merge cooling liquid from the cooling system.
2. Working in a motor compartment, remove the hoses giving cooling liquid to a heater radiator from heater radiator branch pipes.
3. In interior of the car remove a forward part of the central console.
4. Unscrew two screws in a forward part and two screws in a back part and remove a plastic casing of a radiator of a heater (see rice. Removal of a plastic casing of a radiator of a heater).
5. Unscrew two screws fixing a forward part of belts of fastening of a radiator of a heater, then lower belts down and take a heater radiator from the panel (see rice. Unscrewing of the screw of fastening of a belt of a radiator of a heater). Take heater radiator branch pipes from a partition of a motor compartment. In the presence remove condense telny rings of branch pipes of a radiator of a heater.

Installation

Arrangement of sealing rings on a heater radiator branch pipe
1 – heater radiator branch pipe;
2 – partition of a motor compartment;
3 – heater casing;
4 – sealing rings

Installation is made in the sequence, the return to removal taking into account the next moments...

PERFORMANCE ORDER
1. Establish sealing rings of branch pipes of a radiator of a heater in sootvt stviya about rice. An arrangement of sealing rings on a heater radiator branch pipe.
2. Check that rubber laying is precisely placed between belts of fastening and a radiator of a heater.
3. Fill in cooling liquid in the cooling system.