Opel Vectra A

since 1988-1995 release

Repair and operation of the car



Vektr's Opel And
- 1. Maintenance instruction
   Key
   Steering wheel
   Seat belt
   Rear-view mirrors
   Seats
   Ignition lock
   Governing bodies and control devices
   Control lamps of a combination of devices
   Devices
   Control lamps
   Double information display
   On-board computer
   Body elements
   Safety
   Lighting
   Windows, hatch
   Heating and ventilation
   Conditioner
   Automatic transmission
   Instructions on driving
   Gas station
   Catalyst
   Control lamp of electronic system of the engine
   Exhaust system, exhaust gases
   Four-wheel drive
   System of the CU (Traction Control)
   Wheels and tires
   Antisliding chains
   Identification of the car
   Parameters of engines
   Running parameters
   Bases of safe operation of the car
   - Weekly checks and service in way
      If the engine is not started even if the starter works normally
      Start from an external source (other car)
      Replacement of a wheel
      Check of tightness of connections
      Towage
      - Places of weekly checks
         Electric system
         Level of engine oil
         Level of cooling liquid
         Screen wiper brushes
         Windscreen washer liquid level
         Level of brake fluid
         Liquid level in system of steering with the amplifier
         Accumulator
         Tires and check of pressure in tires
   Operational materials and liquids
+ 1.1 Maintenance
+ 2. Engine
+ 3. Repair of DOHC engines
+ 4. Repair of the diesel engine
+ 5. Cooling system
+ 6. Fuel system
+ 7. The fuel and exhaust system of models with system of injection of fuel
+ 8. Exhaust system and system of decrease in toxicity of exhaust gases
+ 9. Fuel systems of the diesel engine
+ 10. Engine electrical systems
+ 11. Transmission
+ 12. Mechanical transmission
+ 13. Automatic transmission
+ 14. Power shafts
+ 15. Brake system
+ 16. Suspension bracket
+ 17. Body
+ 18. Electric equipment
+ 19. Check of malfunctions


24bec775


Level of engine oil

GENERAL INFORMATION

Preliminary actions

• Install the car on the flat horizontal platform.

• Check the level of engine oil before start of the engine, but not earlier than in 5 minutes after switching off of the engine.

Oil

Fill in the engine oil only ordered by manufacturer in the engine.


Prevention

If the level of engine oil constantly decreases and often it is necessary to add oil in the engine, check whether there is leak of engine oil. For this purpose at the parking of the car under the engine spread the big sheet of paper, and check existence of oil spots on paper in the morning that will allow to define leak and its place in the engine. If leak of engine oil is absent, so the engine is worn-out, and oil, getting to engine cylinders, burns down together with fuel.

Level of engine oil has to be between two tags on the probe for measurement of level of oil. At the low level of oil lubricant of the engine can be carried out with interruptions that will lead to serious breakages of the engine. If the level of oil is higher than norm, the sealing ring of a bent shaft can fail.


The probe handle for measurement of level of oil is painted in bright color. Take the probe for measurement of level of engine oil.

Using pure rags, wipe the probe from the oil remains. Insert the probe into the engine and repeatedly take it.

Determine oil level in the engine which has to be between tags of MIN and MAX on the probe. The amount of oil between tags of MIN and MAX makes 1 l.

Uncover a maslozalivny mouth and fill in the required amount of oil in the engine.