Opel Vectra A
since 1988-1995 release
Repair and operation of the car
Vektr's Opel And
- 1. Maintenance instruction
Governing bodies and control devices
Control lamps of a combination of devices
Double information display
Heating and ventilation
Instructions on driving
Control lamp of electronic system of the engine
Exhaust system, exhaust gases
System of the CU (Traction Control)
Wheels and tires
Identification of the car
Parameters of engines
Bases of safe operation of the car
+ Weekly checks and service in way
Operational materials and liquids
+ 1.1 Maintenance
+ 2. Engine
+ 3. Repair of DOHC engines
+ 4. Repair of the diesel engine
+ 5. Cooling system
+ 6. Fuel system
+ 7. The fuel and exhaust system of models with system of injection of fuel
+ 8. Exhaust system and system of decrease in toxicity of exhaust gases
+ 9. Fuel systems of the diesel engine
+ 10. Engine electrical systems
+ 11. Transmission
+ 12. Mechanical transmission
+ 13. Automatic transmission
+ 14. Power shafts
+ 15. Brake system
+ 16. Suspension bracket
+ 17. Body
+ 18. Electric equipment
+ 19. Check of malfunctions
На ooolong.ru стоимость ухода за могилой на кладбище.
http www torrentino com
Heating system and ventilation
System of mixing of Opel air
The stream of air depends on the speed of the movement and an obduv. Therefore having blown include even at the movement.
Always you hold openings for air opened and close only for a while, for example, at penetration outside of smoke, for this purpose put both regulators on
The fan of a heater has 4 speeds.
Intensity of an air stream increases at turning on of the fan of a heater. For increase in comfort turn on the heater fan also during the movement.
The lattice protecting hit of leaves in salon
Average nozzles of ventilation
Both nozzles open by means of a nakatny roller. In situation
Air flow increases at turning on of the fan of a heater.
The direction of a stream of air is regulated by turn of the rotating part and rotation of lamels.
Side nozzles of ventilation
Through them cold or heated air - depending on position of the regulator moves.
The direction of a stream of air is regulated by rotation of lamels.
Turn temperature regulator to the left, turn on the heater fan.
For the maximum obduv of the top space, install both regulators of heating on
For an obduv of the lower space, install the left regulator on
Air stream to a back seat, average nozzles direct to each other and slightly up.
• Through nozzles to a windshield and to side glasses.
• To forward and back lower space.
• Through side nozzles of an obduv.
• In any combination.
Productivity of heating depends on temperature of cooling liquid and is established therefore only at the heated-up engine.
For bystry warming up of salon turn temperature regulator to the right and include a stage of an obduv 3.
The mood, health and comfort of passengers highly depend on the correct control of systems of ventilation and heating.
By installation on heating of the lower space and opening on requirement of averages snuffled an obduva it is possible to achieve temperature drop in salon by the principle "the head in cold, and legs in heat".
Heating of the lower space
The warming channels are laid as well to back lower space.
Removal of moisture and hoarfrost from glasses
Heating of back glass, heating of an external mirror
Press = it is included
Repeatedly press = it is switched off
Heating is turned off automatically approximately in 15 minutes.
Electric heating of front seats