Opel Vectra A

since 1988-1995 release

Repair and operation of the car



Vektr's Opel And
- 1. Maintenance instruction
   Key
   Steering wheel
   Seat belt
   Rear-view mirrors
   Seats
   Ignition lock
   Governing bodies and control devices
   Control lamps of a combination of devices
   Devices
   Control lamps
   Double information display
   On-board computer
   Body elements
   Safety
   Lighting
   Windows, hatch
   Heating and ventilation
   Conditioner
   Automatic transmission
   Instructions on driving
   Gas station
   Catalyst
   Control lamp of electronic system of the engine
   Exhaust system, exhaust gases
   Four-wheel drive
   System of the CU (Traction Control)
   Wheels and tires
   Antisliding chains
   Identification of the car
   Parameters of engines
   Running parameters
   Bases of safe operation of the car
   - Weekly checks and service in way
      If the engine is not started even if the starter works normally
      Start from an external source (other car)
      Replacement of a wheel
      Check of tightness of connections
      Towage
      - Places of weekly checks
         Electric system
         Level of engine oil
         Level of cooling liquid
         Screen wiper brushes
         Windscreen washer liquid level
         Level of brake fluid
         Liquid level in system of steering with the amplifier
         Accumulator
         Tires and check of pressure in tires
   Operational materials and liquids
+ 1.1 Maintenance
+ 2. Engine
+ 3. Repair of DOHC engines
+ 4. Repair of the diesel engine
+ 5. Cooling system
+ 6. Fuel system
+ 7. The fuel and exhaust system of models with system of injection of fuel
+ 8. Exhaust system and system of decrease in toxicity of exhaust gases
+ 9. Fuel systems of the diesel engine
+ 10. Engine electrical systems
+ 11. Transmission
+ 12. Mechanical transmission
+ 13. Automatic transmission
+ 14. Power shafts
+ 15. Brake system
+ 16. Suspension bracket
+ 17. Body
+ 18. Electric equipment
+ 19. Check of malfunctions


24bec775


Electric system

GENERAL INFORMATION

Check all external lighting and a sound signal.

Visually check all available electric sockets, plaits of wires and a bracket of fastening of plaits of wires.

If any separate bulb of external lighting does not burn, the bulb perhaps fused and it needs to be replaced. If both bulbs of stoplights, perhaps do not burn, the switch of stoplights failed.

If several bulbs at the same time do not burn, then it is possible, there is a damage to an electric power-supply circuit of bulbs or the fuse fused.

For replacement of a safety lock, having pulled, take a safety lock from a nest and establish the new safety lock calculated on the same current. If the safety lock repeatedly fuses, find out and remove the cause of its burn-out.