Opel Vectra A

since 1988-1995 release

Repair and operation of the car



Vektr's Opel And
+ 1. Maintenance instruction
+ 1.1 Maintenance
+ 2. Engine
+ 3. Repair of DOHC engines
+ 4. Repair of the diesel engine
+ 5. Cooling system
+ 6. Fuel system
+ 7. The fuel and exhaust system of models with system of injection of fuel
+ 8. Exhaust system and system of decrease in toxicity of exhaust gases
+ 9. Fuel systems of the diesel engine
+ 10. Engine electrical systems
+ 11. Transmission
+ 12. Mechanical transmission
+ 13. Automatic transmission
+ 14. Power shafts
+ 15. Brake system
+ 16. Suspension bracket
+ 17. Body
- 18. Electric equipment
   18.2. General information
   18.3. Electric chains
   18.4. Detection of a faulty chain
   18.5. Safety locks and relay
   18.6. Ignition lock
   18.7. Switch of lighting and indexes of turns
   18.8. Windscreen washer/screen wiper switch
   18.9. Switches on the dashboard
   18:10. Switch of adjustment of provision of an external mirror
   18:11. Switch of the electric drive of the hatch
   18:12. The switch of illumination of salon installed in a door rack
   18:13. Switch of lighting of the luggage compartment
   18:14. Stoplight switch.
   18:15. Switch of a control lamp of the emergency brake
   18:16. Oil pressure sensor
   18:17. Lighter illumination
   18:18. Hours
   18:19. A front seat with heating
   18:20. Combination of devices
   18:21. Elements of a combination of devices
   18:22. Elements of the on-board computer
   18:23. Elements of a control and management system
   18:24. Sound signal
   18:25. Lamp of illumination of salon
   18:26. Replacement of bulbs of internal lighting
   18:27. Headlight
   18:28. Engine of the proofreader of light of headlights
   18:29. Adjustment of light of headlights
   18:30. System of reduction of intensity of light of headlights
   18:31. Forward index of turns
   18:32. Side repeater of turns
   18:33. Forward fog light
   18:34. Back lamps
   18:35. Lamp of illumination of registration plate
   + 18:36. Replacement of bulbs of external lighting
   18:37. Replacement of brushes of a screen wiper
   18:38. Screen wiper levers
   18:39. Washer jets
   18:40. Engine and drafts of a screen wiper
   18:41. Engine of a screen wiper of a back door
   18:42. Headlight screen wiper engine
   18:43. Windscreen washer tank
   18:44. Windscreen washer pump
   18:45. Unidirectional valve of a washer of headlights
   18:46. Elements of window regulators with the electric drive
   18:47. Programming of a control system of window regulators
   18:48. Elements of the central blocking of doors
   18:49. Antenna
   18:50. An antenna mast with the electric drive
   18:51. Loudspeakers
   18:52. Radio tape recorder
   18:53. Hatch drive electric motor
   18:54. Speedometer drive cable
   18:55. Anticreeping alarm system
   18:56. Elements of the anticreeping alarm system
   18:57. Safety cushion
   18:58. A safety cushion from the driver
   18:59. A steering wheel with a safety cushion
   18.60. Contact block of a safety cushion
   18.61. A safety cushion from the passenger
   18.62. A safety cushion arm from the passenger
   18.63. Control unit of safety cushions
   + 18.64. Electric circuits
+ 19. Check of malfunctions


24bec775


18.9. Switches on the dashboard

PERFORMANCE ORDER
1. Remove a weight wire from the accumulator.

LIGHTING SWITCH

Removal

Use of a thin steel core for release of a clamp of the handle of the switch of lighting

Pressing of the clamps fixing the lighting switch

Extraction of the switch of lighting from the dashboard

PERFORMANCE ORDER
1. Turn the switch in the provision of passing beam, then the small screw-driver or a steel core through an opening in the basis of the handle of the switch release a clamp and remove the handle from the switch (see rice. Use of a thin steel core for release of a clamp of the handle of the switch of lighting).
2. Press clamps of the switch and take the switch from the panel, then disconnect from it the electric socket (see rice. Pressing of the clamps fixing the lighting switch, Extraction of the switch of lighting from the dashboard).
3. If the switch of lighting is faulty, replace it as repair of the switch is not provided.

Installation

PERFORMANCE ORDER
1. Installation is made in the sequence, the return to removal.

PUSH-BUTTON SWITCHES

Removal

Removal of the switch from the dashboard

PERFORMANCE ORDER
1. First of all, check whether there is a small opening in the dashboard under the switch button. Insert the thin screw-driver or a steel core into an opening and release the fixing switch spring, pressing it up and take the switch from the dashboard and disconnect from it электричес a cue the socket. In the absence of an opening under the switch, using a screw-driver edge as the lever, for bottom edge take the switch from the dashboard and disconnect from it the electric socket (see rice. Removal of the switch from the dashboard).

Installation

PERFORMANCE ORDER
1. Installation is made in the sequence, the return to removal.

PROOFREADER OF LIGHT OF HEADLIGHTS

The proofreader of light of headlights acts in the same way, as well as push-button switches.

SWITCH OF THE ALARM LIGHT SYSTEM

Removal

Use of the screw-driver for removal of the button from the switch of the alarm light system

Removal of the switch of the alarm light system from the dashboard

PERFORMANCE ORDER
1. Using an edge of the screw-driver and being careful, remove the button from the switch (see rice. Use of the screw-driver for removal of the button from the switch of the alarm light system).
2. Using a screw-driver edge as the lever, remove the central nozzles of ventilation.
3. Using a screw-driver edge as the lever, remove the switch from the dashboard and disconnect from it the electric socket (see rice. Removal of the switch of the alarm light system from the dashboard).

Installation

PERFORMANCE ORDER
1. Installation is made in the sequence, the return to removal.

HEATER FAN SWITCH

Removal

PERFORMANCE ORDER
1. Remove the control panel of a heater.
2. Disconnect the electric socket from the switch.
3. Using a screw-driver edge as the lever, remove the heater fan switch from a back part of the control panel of a heater.

Installation

PERFORMANCE ORDER
1. Installation is made in the sequence, the return to removal.