The device, service, repair Vektr's Opel And - 3.4. Replacement of support of the power unit//1988-1995 /

Opel Vectra A

since 1988-1995 release

Repair and operation of the car



Vektr's Opel And
+ 1. Maintenance instruction
+ 1.1 Maintenance
+ 2. Engine
- 3. Repair of DOHC engines
   3.2. General information
   3.3. Removal and installation of the engine
   3.4. Replacement of support of the power unit
   + 3.5. Gear belt, pulleys, pulley of the mechanism of a tension and intermediate pulley
   3.6. A gear belt with the automatic mechanism of a tension
   3.7. Forward sealing ring of the camshaft
   3.8. Camshafts
   3.9. Installation of a head of the block of cylinders on the engine installed in the car
   3.10. Installation of a head of the block of cylinders on the engine removed from the car
   3.11. Repair of a head of the block of cylinders
   3.12. Hydraulic pushers of valves
   3.13. Replacement of a forward sealing ring of a bent shaft
   3.14. Oil pallet
   3.15. Oil pump
   3.16. Oil heater
+ 4. Repair of the diesel engine
+ 5. Cooling system
+ 6. Fuel system
+ 7. The fuel and exhaust system of models with system of injection of fuel
+ 8. Exhaust system and system of decrease in toxicity of exhaust gases
+ 9. Fuel systems of the diesel engine
+ 10. Engine electrical systems
+ 11. Transmission
+ 12. Mechanical transmission
+ 13. Automatic transmission
+ 14. Power shafts
+ 15. Brake system
+ 16. Suspension bracket
+ 17. Body
+ 18. Electric equipment
+ 19. Check of malfunctions



3.4. Replacement of support of the power unit

GENERAL INFORMATION

Replacement of support of the power unit is made in the same way, as well as for models with SOHC engines. Before replacement of support of the power unit remove an engine mudguard. At installation it is necessary to use a new mudguard of the engine.