1. Weaken tightening a bolt, the fixing rod of the mechanism of the choice of transfers to draft.
2. Remove a fixing bracket, then take an axis of the universal hinge of draft.
3. Remove a spring bracket, then take a gear shifting lever knot axis from an arm of back fastening of the power unit.
4. Remove draft from the car.
Installation
Elements of draft of the mechanism of the choice of transfers
Draft is noted by an arrow.
PERFORMANCE ORDER
1. Check a condition of elements of draft and, if necessary, replace them (see the drawing). It is not recommended to make further dismantling.
2. Installation is made in the sequence, the return to removal, but before tightening of a tightening bolt adjust draft of the mechanism of gear shifting.
