Opel Vectra A

since 1988-1995 release

Repair and operation of the car


Vektr's Opel And
+ 1. Maintenance instruction
+ 1.1 Maintenance
+ 2. Engine
+ 3. Repair of DOHC engines
+ 4. Repair of the diesel engine
+ 5. Cooling system
+ 6. Fuel system
+ 7. The fuel and exhaust system of models with system of injection of fuel
+ 8. Exhaust system and system of decrease in toxicity of exhaust gases
+ 9. Fuel systems of the diesel engine
+ 10. Engine electrical systems
+ 11. Transmission
- 12. Mechanical transmission
   12.2. General information
   12.3. Adjustment of draft of the mechanism of the choice of transfers
   12.4. Gear shifting lever knot
   12.5. Draft of the mechanism of the choice of transfers
   12.6. Gear shifting lever
   12.7. Protective cover of the lever of gear shifting
   12.8. Sealing rings of differential
   12.9. Sealing ring of an entrance shaft of the transmission
   12:10. Removal and installation of the transmission
   12:11. Repair of the transmission
   12:12. Speedometer drive
   12:13. Switch of lamps of a backing
+ 13. Automatic transmission
+ 14. Power shafts
+ 15. Brake system
+ 16. Suspension bracket
+ 17. Body
+ 18. Electric equipment
+ 19. Check of malfunctions


24bec775


12:12. Speedometer drive

Removal

Unscrewing of a bolt of fastening of the holder of knot of the drive of a speedometer

PERFORMANCE ORDER
1. Unscrew the adjusting plug and take a speedometer drive cable from the transmission.
2. In the presence disconnect the electric socket of the odometer.
3. Unscrew a bolt, the fixing holder and take speedometer drive knot from the transmission (see the drawing).

Installation

PERFORMANCE ORDER
1. At installation it is necessary to use a new sealing ring and to cover it with lubricant on the basis of a molybdenum disulfide. Tighten a bolt of fastening of the holder of knot of the drive of a speedometer the required moment. Connect a cable of the drive of a speedometer and the electric socket of the odometer.