Opel Vectra A

since 1988-1995 release

Repair and operation of the car


Vektr's Opel And
+ 1. Maintenance instruction
+ 1.1 Maintenance
+ 2. Engine
+ 3. Repair of DOHC engines
+ 4. Repair of the diesel engine
+ 5. Cooling system
+ 6. Fuel system
+ 7. The fuel and exhaust system of models with system of injection of fuel
- 8. Exhaust system and system of decrease in toxicity of exhaust gases
   8.2. System of decrease in toxicity of exhaust gases
   8.3. System of repeated combustion of exhaust gases (EGR)
   8.4. The EGR valve (models with the Multec system)
   8.5. EGR valve (Simtec system)
   8.6. EGR module (X16 SZ models)
   8.7. Knot of the air pump (Simtec system)
   8.8. Valve of a cut-off of system of reduction of toxicity
   8.9. The switching-off valve of system of reduction of toxicity
   8.10. Tube and unidirectional valve of system of reduction of toxicity
   8.11. Catalyst
   8.12. A canister with coal
   8.13. The oxygen sensor (models with the catalyst)
   8.14. Final collector
   - 8.15. Exhaust system
      8.15.1. A reception exhaust pipe on models with the SOHC engine
      8.15.2. A reception exhaust pipe on models with the DOHC engine
      8.15.3. Forward muffler or catalyst
      8.15.4. Central section
      8.15.5. Back section
+ 9. Fuel systems of the diesel engine
+ 10. Engine electrical systems
+ 11. Transmission
+ 12. Mechanical transmission
+ 13. Automatic transmission
+ 14. Power shafts
+ 15. Brake system
+ 16. Suspension bracket
+ 17. Body
+ 18. Electric equipment
+ 19. Check of malfunctions


24bec775


8.15.1. A reception exhaust pipe on models with the SOHC engine

 Flexible connection of a reception exhaust pipe on models with SOHC engines

Arrangement of an arm of fastening of a reception exhaust pipe on models with SOHC engines

Unscrewing of a bolt of fastening of a reception exhaust pipe to a final collector on models with SOHC engines

PERFORMANCE ORDER
1. On models with the catalyst remove a weight wire from the accumulator, then disconnect the electric socket of the sensor of oxygen located behind a broad tank.
2. Lift a forward part of the car and record on supports or install the car over a viewing hole.
3. Unscrew two bolts and disconnect a reception exhaust pipe from the muffler or the catalyst. Remove a sealing ring and springs (see rice. Flexible connection of a reception exhaust pipe on models with SOHC engines).
4. Unscrew a reception exhaust pipe from an arm on the block of cylinders (see rice. An arrangement of an arm of fastening of a reception exhaust pipe on models with SOHC engines).
5. Unscrew four bolts fixing a reception exhaust pipe to a final collector and remove a reception exhaust pipe (see rice. Unscrewing of a bolt of fastening of a reception exhaust pipe to a final collector on models with SOHC engines). Remove the laying located between a collector and a reception exhaust pipe.

Installation

PERFORMANCE ORDER
1. Installation is made in the sequence, the return to removal.
2. Establish new laying between a reception exhaust pipe and a final collector. In flexible connection establish a new sealing ring. Tighten all bolts the required moment.