Opel Vectra A

since 1988-1995 release

Repair and operation of the car



Vektr's Opel And
+ 1. Maintenance instruction
- 1.1 Maintenance
   1.2. Frequency of service
   - 1.3. Maintenance
      1.3.1. Each 7500 km or 12 months
      + 1.3.2. Each 15 000 km or 12 months
      - 1.3.3. Full service each 30 000 km or 24 months
         1.3.3.2. Replacement of the fuel filter (diesel engines)
         1.3.3.3. Replacement of the filtering element of the air filter
         1.3.3.4. Check of adjustment of temperature of the air coming to the engine
         1.3.3.5. Replacement of the fuel filter (petrol engines)
         1.3.3.6. Check and adjustment of gaps of valves (diesel engines)
         1.3.3.7. Check of a gear belt (diesel engines)
         1.3.3.8. Replacement of spark plugs (SOHC engines)
         1.3.3.9. Cover of the distributor of ignition and high-voltage wires
         1.3.3.10. Check of a cable of coupling
         1.3.3.11. Check of level of oil in the mechanical transmission
         1.3.3.12. Check of the automatic transmission
         1.3.3.13. Check of brake shoes
      1.3.4. Main service. Each 60 000 km or 48 months
      1.3.5. Each 105 000 km or 84 months
      1.3.6. Each 120 000 km or 96 months
+ 2. Engine
+ 3. Repair of DOHC engines
+ 4. Repair of the diesel engine
+ 5. Cooling system
+ 6. Fuel system
+ 7. The fuel and exhaust system of models with system of injection of fuel
+ 8. Exhaust system and system of decrease in toxicity of exhaust gases
+ 9. Fuel systems of the diesel engine
+ 10. Engine electrical systems
+ 11. Transmission
+ 12. Mechanical transmission
+ 13. Automatic transmission
+ 14. Power shafts
+ 15. Brake system
+ 16. Suspension bracket
+ 17. Body
+ 18. Electric equipment
+ 19. Check of malfunctions


24bec775


1.3.3.9. Cover (diesel engines)

PERFORMANCE ORDER
1. Uncover the distributor of ignition and high-voltage wires and wipe them dry.
2. Clear ignition coil plugs, remove an ignition distributor rotor. Check a rotor and a cover of the distributor of ignition for existence of cracks.
3. Check high-voltage wires for existence of electric breakdown and oxidation.
4. Check internal state of a candle tip which should not have signs of corrosion which represents solid white powder. Densely establish a candle tip on a candle.
5. Replacement of spark plugs is made in a set.