Prevention
For check of a tension of a driving belt of the pump of the amplifier of steering it is necessary to use a special template.
Check
The tension of a belt is regulated by change of length of carving draft. The deflection of a belt has to make 10 mm when pressing by a thumb on a belt between pulleys. At an excessive tension of a belt the pump of the amplifier of steering can fail.
PERFORMANCE ORDER |
1. Check a condition of a belt on all length and replace it in the presence of damages or wear. |
|
Adjustment
Arrangement of carving draft for adjustment of a tension of a belt of the pump of the amplifier of steering
PERFORMANCE ORDER |
1. Weaken the regulator and assembly bolts. |
2. Weaken nuts of the regulator and an otregula to a ruyta length of carving draft (see the drawing). |
3. Tighten nuts of the regulator and assembly bolts the required moment. |
4. At installation of a new belt through several honeycombs of kilometers repeatedly check its tension. |
|
|