Opel Vectra A

since 1988-1995 release

Repair and operation of the car

Vektr's Opel And
+ 1. Maintenance instruction
+ 1.1 Maintenance
+ 2. Engine
+ 3. Repair of DOHC engines
+ 4. Repair of the diesel engine
+ 5. Cooling system
+ 6. Fuel system
+ 7. The fuel and exhaust system of models with system of injection of fuel
+ 8. Exhaust system and system of decrease in toxicity of exhaust gases
+ 9. Fuel systems of the diesel engine
+ 10. Engine electrical systems
+ 11. Transmission
+ 12. Mechanical transmission
+ 13. Automatic transmission
+ 14. Power shafts
+ 15. Brake system
+ 16. Suspension bracket
- 17. Body
   17.2. General information
   17.3. Security measures when carrying out welding works
   17.4. Care of a body
   17.5. Repair of insignificant damages of a body
   17.6. Repair of strong damages of a body
   17.7. Cowl
   17.8. Cowl lock
   17.9. Cowl lock cable
   17:10. Trunk lid (Sedan models)
   17:11. Lock of a trunk lid (Sedan model)
   17:12. Cylinder of the lock of a trunk lid (Sedan model)
   17:13. Back door (Hatchback models)
   17:14. Lock of a back door (Hatchback model)
   17:15. Cylinder of the lock of a back door (Hatchback model)
   17:16. Racks of a back door (Hatchback model)
   17:17. Doors
   17:18. Door upholstery
   17:19. Internal handle of opening of a door
   17:20. External handle of opening of a door
   17:21. Door lock cylinder
   17:22. Door lock
   17:23. Limiter of opening of a door
   17:24. Wind and back flew down
   17:25. Back triangular window leaves
   17:26. Door glass
   17:27. Window regulators
   17:28. External rear-view mirror
   17:29. Bumpers
   17:30. Front grille
   17:31. Windshield deflector
   17:32. Wheel arch inserts
   17:33. Lower protective plate (mudguard) of the engine
   17:34. Folding shutter of a fuel-filling mouth of the fuel tank
   + 17:35. Hatch elements
   17:36. Finishing of an interior
   + 17:37. Panels of finishing of the dashboard
   17:38. Central console
   17:39. Ceiling
   17:40. Sitting (without mechanisms of a tension of seat belts)
   17:41. Seat belts
   17:42. Seat belt tension mechanism
   17:43. Forward sitting with the seat belt tension mechanism
+ 18. Electric equipment
+ 19. Check of malfunctions

17:38. Central console

BACK SECTION

Removal

Removal of a decorative slip from the central console

Vyvinchivaniye of the forward screw of fastening of back section of the central console

Removal of the handle from a forward part of the lever of the emergency brake

Removal of the block for storage of cartridges from a back part of the central console

Unscrewing of the back screw of fastening of back section of the central console

PERFORMANCE ORDER

1. For access to forward screws of fastening of back section of the central console remove a decorative slip from a forward part of the central console (see rice. Removal of a decorative slip from the central console).

2. Unscrew the forward screw of fastening of back section of the central console (see fig. of Vyvinchivaniye of the forward screw of fastening of back section of the central console).

3. Remove a protective cover from the lever of the emergency brake, then remove the handle from a forward part of the lever of the emergency brake (see rice. Removal of the handle from a forward part of the lever of the emergency brake).

4. Remove the block for storage of cartridges from a back part of the central console or a rubber pillow for access to back screws of fastening (see rice. Removal of the block for storage of cartridges from a back part of the central console).

5. Unscrew the back screw of fastening, then lift back section of the central console and remove it on the lever of the emergency brake (see rice. Unscrewing of the back screw of fastening of back section of the central console).

In the presence disconnect electric sockets from the switch steklopodjy a nickname or the on-board computer, previously having removed a weight wire from the accumulator.

Installation

PERFORMANCE ORDER

1. Installation is made in the sequence, the return to removal.

FORWARD PART

Removal

Detachment of the electric socket from the lighter

Unscrewing of two screws of fastening of a forward part of the central console to the dashboard

Unscrewing of the lower side screw of fastening of the central console to the dashboard

PERFORMANCE ORDER

1. Remove back section of the central console.

2. Remove the gear shifting lever.

3. Remove a weight wire from the accumulator.

4. Remove the block of an ashtray and the lighter from the central console and disconnect the electric socket from the lighter (see rice. A detachment of the electric socket from the lighter).

5. Unscrew two the fastenings of the central console which opened the screw to the dashboard (see rice. Unscrewing of two screws of fastening of a forward part of the central console to the dashboard).

Working from two parties of the central console, unscrew two lower screws of fastening of the central console to the dashboard and two screws fixing an arm of the central console to a floor (see rice. Unscrewing of the lower side screw of fastening of the central console to the dashboard).

Remove a forward part of the central console.

Installation

PERFORMANCE ORDER

1. Installation is made in the sequence, the return to removal, but at the same time take a lighter electrical wiring through an aperture in the central console.