Opel Vectra A

since 1988-1995 release

Repair and operation of the car



Vektr's Opel And
+ 1. Maintenance instruction
+ 1.1 Maintenance
+ 2. Engine
+ 3. Repair of DOHC engines
+ 4. Repair of the diesel engine
+ 5. Cooling system
+ 6. Fuel system
+ 7. The fuel and exhaust system of models with system of injection of fuel
+ 8. Exhaust system and system of decrease in toxicity of exhaust gases
+ 9. Fuel systems of the diesel engine
+ 10. Engine electrical systems
+ 11. Transmission
+ 12. Mechanical transmission
+ 13. Automatic transmission
+ 14. Power shafts
+ 15. Brake system
+ 16. Suspension bracket
- 17. Body
   17.2. General information
   17.3. Security measures when carrying out welding works
   17.4. Care of a body
   17.5. Repair of insignificant damages of a body
   17.6. Repair of strong damages of a body
   17.7. Cowl
   17.8. Cowl lock
   17.9. Cowl lock cable
   17:10. Trunk lid (Sedan models)
   17:11. Lock of a trunk lid (Sedan model)
   17:12. Cylinder of the lock of a trunk lid (Sedan model)
   17:13. Back door (Hatchback models)
   17:14. Lock of a back door (Hatchback model)
   17:15. Cylinder of the lock of a back door (Hatchback model)
   17:16. Racks of a back door (Hatchback model)
   17:17. Doors
   17:18. Door upholstery
   17:19. Internal handle of opening of a door
   17:20. External handle of opening of a door
   17:21. Door lock cylinder
   17:22. Door lock
   17:23. Limiter of opening of a door
   17:24. Wind and back flew down
   17:25. Back triangular window leaves
   17:26. Door glass
   17:27. Window regulators
   17:28. External rear-view mirror
   17:29. Bumpers
   17:30. Front grille
   17:31. Windshield deflector
   17:32. Wheel arch inserts
   17:33. Lower protective plate (mudguard) of the engine
   17:34. Folding shutter of a fuel-filling mouth of the fuel tank
   + 17:35. Hatch elements
   17:36. Finishing of an interior
   + 17:37. Panels of finishing of the dashboard
   17:38. Central console
   17:39. Ceiling
   17:40. Sitting (without mechanisms of a tension of seat belts)
   17:41. Seat belts
   17:42. Seat belt tension mechanism
   17:43. Forward sitting with the seat belt tension mechanism
+ 18. Electric equipment
+ 19. Check of malfunctions


24bec775


17:13. Back door (Hatchback models)

Removal

Removal of the panel of finishing of a back door

Arrangement of bolts of fastening of hinges of a back door

PERFORMANCE ORDER
1. Open a back door.
2. Remove a weight wire from the accumulator.
3. Unscrew screws and remove the panel of finishing of a back door.
4. Disconnect all available электричес Kia sockets and disconnect a hose of supply of liquid to a washer of back glass.
5. If the back door is repeatedly established, tie a thin long cord to all electric sockets and a hose and after extraction from a door of electropro-vodka and a hose through the upper edge of a door untie a cord and leave it at doors.
6. Release the panel of finishing of a back door on a car body, at the same time do not break percussion caps, and slightly lower a back part of a ceiling for access to screws of fastening of hinges of a back door (see rice. Removal of the panel of finishing of a back door, Arrangement of bolts of fastening of hinges of a back door). Using a marker, note position of hinges.
7. While the assistant supports a back door, disconnect racks of a back door from their spherical hinges.
8. Reliably supporting a door, unscrew bolts of fastening of hinges and remove a back door from the car.
9. If necessary beat out hinged fingers and remove hinges.
10. At installation of a new back door remove all removable details from an old door and establish on new.

Installation

Installation is made in the sequence, the return to removal taking into account the next moments...

PERFORMANCE ORDER
1. You make installation of hinges according to earlier made tags.
2. At repeated installation of a back door for a thin cord involve electric wires and a hose of supply of liquid to a washer of back glass at a back door.
3. After installation of a back door check that in a closed position the gap between a back door and elements of a body of the car is identical everywhere. If necessary adjust the provision of a back door for what weaken bolts of fastening of hinges and, moving a door within the extended installation openings, find required position of a door.
4. Check that the lock of a back door is precisely combined with a shock plate of the lock.