Opel Vectra A

since 1988-1995 release

Repair and operation of the car



Vektr's Opel And
+ 1. Maintenance instruction
+ 1.1 Maintenance
+ 2. Engine
+ 3. Repair of DOHC engines
+ 4. Repair of the diesel engine
+ 5. Cooling system
+ 6. Fuel system
+ 7. The fuel and exhaust system of models with system of injection of fuel
+ 8. Exhaust system and system of decrease in toxicity of exhaust gases
+ 9. Fuel systems of the diesel engine
+ 10. Engine electrical systems
+ 11. Transmission
+ 12. Mechanical transmission
+ 13. Automatic transmission
+ 14. Power shafts
+ 15. Brake system
- 16. Suspension bracket
   16.2. General information
   16.3. Replacement of the bearing of a forward wheel
   16.4. Forward lower frame
   16.5. Rack of a forward suspension bracket
   16.6. Lower lever of a forward suspension bracket
   16.7. Replacement of plugs of the lower lever of a forward suspension bracket
   16.8. Spherical hinge of the lower lever of a forward suspension bracket
   16.9. Forward stabilizer of cross stability
   16:10. Replacement of plugs of the forward stabilizer of a cross ustoycha of a vost
   16:11. Adjustment of the bearing of a back wheel (SOHC model)
   16:12. Replacement of the bearing of a back wheel (the SOHC model till 1993)
   16:13. Replacement of the hug bearing of a back wheel (model since 1993)
   16:14. A nave of a back wheel (model with the SOHC engine)
   16:15. Back shock-absorber
   16:16. Replacement of rubber elements of fastening of the back shock-absorber
   16:17. Springs of a back suspension bracket (SOHC model)
   16:18. Knot of longitudinal levers of a back suspension bracket (model with SOHC engines)
   16:19. Back stabilizer of cross stability
   16:20. Replacement of the plug of the longitudinal lever of a back suspension bracket
   16:21. The fastener of a back nave (model with SOHC engines)
   16:22. Check of system of the self-leveled back suspension bracket
   16:23. Control system elements self-leveled a back suspension bracket
   16:24. Replacement of the bearing of a back wheel (model with DOHC engines)
   16:25. A nave of a back wheel (model with DOHC engines)
   16:26. Knot of a back suspension bracket (model with DOHC engines)
   16:27. The diagonal lever of a back suspension bracket (model with DOHC engines)
   16:28. Back stabilizer of cross stability
   16:29. Steering wheel
   16:30. Centering of a steering wheel
   16:31. Replacement of the elastic coupling of a shaft of steering transfer
   16:32. Steering column
   16:33. Repair of a steering column
   16:34. Shock-absorber of steering transfer
   + 16:35. Replacement of protection covers of steering transfer
   16:36. Removal of air from system of steering with the amplifier
   16:37. Pump of the amplifier of steering
   16:38. Popolnitelny tank of system of the amplifier of steering
   16:39. Pipes of cooling of liquid of the amplifier of steering
   16:40. Tips of steering draft
   16:41. Steering draft
   16:42. Angles of installation of forward wheels
+ 17. Body
+ 18. Electric equipment
+ 19. Check of malfunctions


24bec775


16:29. Steering wheel

GENERAL INFORMATION

Prevention

For removal of a steering wheel it is necessary to use a stripper.

If on the car the safety cushion is established, before work read the prevention (see subsection 18.57).


Removal

Disconnect the electric socket from the button of a sound signal

Bending back of uvulas of the fixing washer fixing a nut of a steering wheel

Use of a stripper for removal of a steering wheel

PERFORMANCE ORDER
1. Remove a weight wire from the accumulator.
2. Establish forward wheels of the car for the movement directly forward.
3. Using a screw-driver edge as the lever, remove the button of a sound signal from the central part of a steering wheel and disconnect from it the electric socket (see rice. Disconnect the electric socket from the button of a sound signal).
4. The screw-driver unbend uvulas of the fixing washer which fixes a nut of a steering wheel from unscrewing (see rice. Bending back of uvulas of the fixing washer fixing a nut of a steering wheel).
5. Unscrew a nut of a steering wheel and remove the fixing washer.
6. Apply combination tags on a steering wheel and an end face of a steering shaft.
7. Using a stripper, remove a steering wheel from a steering shaft (see rice. Use of a stripper for removal of a steering wheel).

Installation

PERFORMANCE ORDER
1. Combine adjusting tags and establish by easy blows of a kiyanka a steering wheel on a steering shaft. Check centering of a steering wheel.
2. Establish the fixing washer and screw a nut of fastening of a steering wheel and tighten it the required moment. For fixing of a nut from unscrewing bend uvulas of the fixing washer.
3. Connect the electric socket and install the button of a sound signal. Connect a weight wire to the accumulator.